top of page

3D Printed Clamp for keeping wires tight into a 30Volt 0.5Amp PoE Brick that comes with some Cambium Radios.

 

INFO on the brick used to model the bracket:

Manufacturer: PHIHONG

P/N: N000900L001B

Model:PSA15M-300(AP)

 

(Use Photo of PoE Injector to verify you are buying the correct model, no returns)

 

Takes 4+ cable ties to fasten everything, I use them with Thomas & Betts TyWraps. (Not Included)

 

NOTE:

These are 3D Printed PLA Plastic items.

They will warp if left in the sun for a short amount of time (~120+ deg F).

They should be installed only in locations with air conditioning or colder climates.

They burn nicely, do not use in locations next to other combustibles; If the PoE brick catches fire from lightning or an electrical fire, these would likely accelerate the fire even more.

If they are popular enough, I will be able to get a proper injection mold made and will be able to produce them much cheaper and make them out of a heat resistant plastic that doesn't warp when left in a hot car or on a window sill.

 

The design is Opensource and I put it on my GitLab page for if you have a 3D printer.

Of course buying them from me will save you time and hassle, and help fund Injection molds being produced for a better heat resistant version.

 

The .stl files can be found at:

https://gitlab.com/duhsn/poe-brick-clamps

I print them with a 0.6mm nozzle extra warm with an extra slow speed to make them nice and rigid.

They take about 1.5 hours each to print at the settings I use.

Cam 30V .5A PoE Clamp V1

SKU: CAM300501
$3.75Price
    bottom of page